Wave ID Nano - World's smallest NFC Reader [USB-C]
The NFC Reader Wave ID® Nano by rf IDEAS is equipped with USB-C and meets Military Standard MIL-STD-810. Can read any type of NFC Cards. No drivers required.
Your cart is empty
NFC devices for easily reading and writing (encoding) NFC Tags and Smart Cards using a PC, a Mac, a tablet or a smartphone. External NFC readers can be connected via USB, Bluetooth, or Ethernet to trasmit data to devices.
Subcategories
There are 47 products.
The NFC Reader Wave ID® Nano by rf IDEAS is equipped with USB-C and meets Military Standard MIL-STD-810. Can read any type of NFC Cards. No drivers required.
As low as: 45.00 €/pz. for 20 pieces
The Identiv uTrust 4701 F Reader is the ideal combination of contact, contactless and NFC technologies in a single device.
As low as: 90.28 €/pz. for 20 pieces
The Identiv uTrust 3721 F HF is able to read, in keyboard emulation mode, both the user memory and the UID of NFC Tags with ISO14443 and ISO15693 standards.
As low as: 106.85 €/pz. for 20 pieces
The Identiv uTrust 3721 F HF+LF is able to read, in keyboard emulation mode, RFID Tags 13.56 MHz (NFC, ISO 14443 / 15693) and 125 kHz.
As low as: 99.00 €/pz. for 20 pieces
The Identiv uTrust 3720 F LF + HF reader is a powerful tool for programming tags at 125 KHz and 13.56 MHz frequencies. Compatible with Windows, Mac, Linux and Android.
As low as: 82.00 €/pz. for 20 pieces
Identiv’s uTrust 3720 F Multi-ISO Smart Card Reader integrates multi-ISO (ISO14443 and ISO15693) contactless interface capabilities to support a wide variety of identification applications.
The Identiv uTrust 3700 IG NFC Reader is ideal in scenarios where device sanitization is required, thanks to its IP65 waterproof rating.
As low as: 29.90 €/pz. for 25 pieces
Identiv SCM uTrust 3700 F NFC Reader is a powerful hardware for encoding NFC Tags and cards ISO/IEC 14443A/B, compatible with Windows, Mac, Linux, Android, and TagXplorer software by NXP.
Wireless NFC reader with WiFi, Ethernet, UART, RS232, USB, I/O connectivity. It supports HTTP POST, TCP/IP and UDP protocols as well as Serial HID. Works as a Wi-Fi repeater too.
As low as: 52.25 €/pz. for 10 pieces
NFC reader with proprietary firmware compatible with a huge variety of free libraries, tools, softwares SDK and APIs, with extensive documentation and frequent updates.
As low as: 55.05 €/pz. for 10 pieces
NFC reader with proprietary firmware compatible with a huge variety of free libraries, tools, softwares SDK and APIs, with extensive documentation and frequent updates.
NFC reader with proprietary firmware compatible with a huge variety of free libraries, tools, softwares SDK and APIs, with extensive documentation and frequent updates.
The 2173 Bluetooth® LF/HF RFID Reader enables a Bluetooth® host device to read and write to a wide variety of Low Frequency and High Frequency NFC Tags.
NFC Reader with Bluetooth® connectivity, to enable iOS, Android and Windows smartphones and tablets to read NFC Tags. Rugged and IP54 rated.
The SATO CT4-LX is a compact, thermal transfer label printer with integrated NFC encoder. Can print and program NFC Stickers simultaneously.
The SATO CL4NX is a thermal transfer printer with embedded NFC encoder. This printer can print and encode NFC Stickers simultaneously.
As low as: 55.29 €/pz. for 10 pieces
NFC / RFID breakout board with Adafruit PN532 chip-set (the most popular NFC chip on the market). NFC Shield for Arduino.
NiceLabel 10 allows you to print professional labels and, in the Designer Pro version, to encode the chip of an NFC Sticker at the same time.
The NFC XL Reader is the only one that allows you to read and write NFC Tags and Cards up to a distance of 15 cm. It supports NFC Forum types 1-4 and the P2P and HCE protocols.
Software that turns any compatible NFC reader into a keyboard emulator that copies the contents of a Tag's user memory (or Tag's UID) onto your computer.