Confidex Ironside Micro NFC NTAG213 IP68
The Confidex Ironside Micro NFC NTAG213 Tags are reinforced NFC Tags, for extreme use. They can withstand shocks, chemicals and moisture. They are equipped with a hole to be riveted. The adhesive is optional.
Do you need a larger quantity? Did you find this product at a better price? Contact us
The Confidex Ironside Micro™ NFC Tag is a reinforced industrial tag with reduced dimensions. It is designed to withstand shocks, moisture and chemicals. It can be applied on any surface, even metal, using the central hole or the adhesive on the back (optional).
- Material: high quality technopolymers
- Adhesive on the back: 3M 300LSE high-performance acrylic adhesive (optional)
- Dimensions: 27 x 27 x 5.5 mm / 1.06 x 1.06 x 0.22 in
- 1 central hole for M3 screws
- Operating temperature: from -35°C to 85°C
- Storage temperature: from -35°C to 85°C
- Protection class: IP68
- Weight: 4.3 g
No physical or performance modification in:
- 168 hours of exposure to engine oil
- 168 hours of exposure to salt water (10% salinity)
- 5 hours exposure to sulfuric acid (10%, pH 2)
- 1 hour of exposure to NaOH (10%, pH 13)
Acetone should be avoided.
Ironside Micro NFC can be applied with different fixing methods:
- 3M adhesive (optional)
- Fixed with M3 screws or nails
- Fixed with cable tie (maximum width 3mm)
When mounting the Tag with the adhesive, clean and dry the surface to get the maximum bond strength.
The ideal application temperature goes from +21°C to +38°C, the bond strength can be improved with a constant application pressure and a moderate heating from +38°C to +54°C.
- NFC Chip
- NXP NTAG213
- NFC Standard
- ISO/IEC 14443-A
- NFC Forum
- Type 2
- Universal Compatibility
- UID (Unique ID)
- 7 bytes
- Communication rate
- 106 kbit/s
- Not supported
- Read/Write endurance
- 100,000 cycles
- Data retention
- 10 years
- Password Protection
- Works on metal
- Waterproof level
- Fully Waterproof
- Protection class
- Commodity code (HS)
You might also like
Encoding Service for NFC Tags. Please, specify the total number of NFC Tags to be programmed. Add the product to the cart. After completing the order, click here to send the instructions.
13 other products in the same category:
Extremely resistant Cable Ties with embedded NFC Tag, completely waterproof, weatherproof, and suitable for industrial environments. Once closed, cable ties must be broken to be removed.
One of the most resistant NFC Tag, for industrial use. IP68 certified, resistant up to a peak of 130°C. Equipped with anti-metal layer and a screw hole.
An 'asset pack' of assorted NFC Tags with the common feature of being durable and resistant in harsh environments. Ideal for making tests before a massive order.
Confidex Steelwave Micro II™ NFC Tags are small-sized NFC Asset Tags, rugged, waterproof, and ideal for harsh environment. Can be glued or riveted on virtually any material.
The smallest On-metal NFC Tag on the market. In just 6 mm in diameter, it houses an ICODE SLIX chip. Waterproof, adhesive, and suitable for metal applications.
NFC Glass Tags that can be mounted on virtually any surface, resistant to chemical exposures, small in size.
One of most resistant NFC Tags for industrial use. IP68 certified, resistant up to 120°C. Totally waterproof and dustproof. Equipped with anti-metal layer.
Flexible On-metal NFC tags for industrial environments and harsh conditions, resistant to sea water, mineral oils, temperature changes, vibrations and shocks.
Cable Ties suitable for industrial use in hostile environments. Made in PA66, they are IP68 certified and can withstand up to 85°C. Universal compatibility with NFC-enabled smartphones.
Thanks to their thermoplastic elastomer (TPE) housing, these NFC tags resist aggressive liquids, hostile environments, seawater, temperature fluctuations, vibrations and shocks.
Round NFC Tags in ABS with a 3mm-hole. Durable and waterproof (IP66 rated), you can hang them on the wall. Universal Compatibility. Useful for industrial use.
The most resistant NFC Tag, for industrial use. IP68 certified, resistant up to 230°C. Totally waterproof and dustproof. Equipped with anti-metal layer and 3M glue for outodoor.
Customers who bought this product also bought:
Completely Waterproof NFC Stickers made of PVC, with NTAG213 chip. Universal Compatibility. Personalized with your graphics. 3M glue. info After completing the order, click here to submit your artwork.
Adhesive Panels made of Forex PVC, equipped with NTAG13 NFC Tags, compatible with all devices, ideal for marketing use. Weatherproof, waterproof, printed with NFC logo, blue background. Dimensions: 6x6cm Warning: the dimensions of this product have been modified on 11/19/2019
NFC Tags specially made for Laundry. Suitable for use in clothing, thanks to 2 little holes. They can resist to industrial washing and high temperatures. This product is out of production. Alternatively, we recommend this 16mm washable NFC Tag.
Rectangular, white, printable, adhesive NFC Tags. NXP MIFARE Ultralight® C chip with 3DES encryption support. Memory of 144 bytes.
Adhesive NFC Tags with NTAG21x chip, compatible with all devices, round, printed with NFC logo. They can be applied on metal surfaces.
White NFC Tags with NXP NTAG213 chip. Better perfomances. Universal compatibility. Memory of 144 bytes. Waterproof. Password-protectable.