Seal Tag eTamper ICODE® SLIX
A Tamper-Proof NFC Seal, equipped with a Type V NFC Chip that stops working when the sealing wire loop is broken, making tampering evident via NFC.
Do you need a larger quantity? Did you find this product at a better price? Contact us
The Seal Tag eTamper (electronic tamper) can be fixed very easily, with a closure similar to a padlock. Once connected to an item, the wire is closed and the Tag becomes operative. To remove it, you need to break the wire, making the tag permanently unreadable.
This NFC seal is the ideal product whenever you need to authenticate an item where the Tag is affixed, or to make sure that an asset has not been opened/handled since the last maintenance.
eTamper Tags can not be removed or reused in a malicious way. The wire, however, the pull strength has been optimized so that a human can break it when needed, but the tag does not accidentally open.
The Seal Tag can be customized with the laser engraving of a QR code that coincides with the chip's UID (see drop-down menu).
NFC IC Specifications
- NXP ICODE® SLIX
- Available memory: 112 bytes
- 8-byte UID
- NFC Forum Type V
- ISO/IEC 15693
- Material: polycarbonate (PC)
- Dimensions: approximately 23 x 17 x 3 mm (wire length: 65 mm)
- Operating temperature: -40 ~ 85 ° C
- Storage temperature: -40 ~ 90 ° C
- Weight: about 1 g
- Vibration resistance: IEC 68.2.6 [10 g, 10 to 2000 Hz, 3 axes, 2.5 h]
- Impact resistance: IEC 68.2.29 [40 g, 18 ms, 6 axes, 2000 times]
- Traction force: 10 N minimum (connector should not go out)
- NFC Chip
- NXP ICODE® SLIX
- NFC Standard
- ISO/IEC 15693
- NFC Forum
- Type V
- Universal Compatibility
- UID (Unique ID)
- 8 bytes
- Available memory
- 112 bytes
- Communication rate
- 53 kbps
- Not supported
- Read/Write endurance
- 100,000 cycles
- Data retention
- 50 years
- Password Protection
16 other products in the same category:
NFC Tags in PPS with 2 holes. Can withstand disinfectants and washes with industrial detergents, 120°C for 100 consecutive hours, 70 bar for 3 minutes.
NFC Tag for Clothing: can be sewn, ironed and wrinkled. Completely waterproof, can withstand up to 150°C. Available in Adhesive and ThermoSetting models.
NFC Tags heat sealable for clothing. This Tag is suitable for application on rigid or semi-rigid, like a hat. It can not be bent.
The smallest On-metal NFC Tag on the market. In just 6 mm in diameter, it houses an ICODE SLIX chip. Waterproof, adhesive, and suitable for metal applications.
Completely Waterproof and Weatherproof NFC Stickers made of IP68 PVC. Personalized with your logo and/or variable data. 3M 467MP Glue, resistant to water, humidity and UV. info After completing the order, click here to submit your artwork.
One of most resistant NFC Tags for industrial use. IP68 certified, resistant up to 120°C. Totally waterproof and dustproof. Equipped with anti-metal layer.
Confidex Steelwave Micro II™ NFC Tags are small-sized NFC Asset Tags, rugged, waterproof, and ideal for harsh environment. Can be glued or riveted on virtually any material.
The most resistant NFC Tag, for industrial use. IP68 certified, resistant up to 230°C. Totally waterproof and dustproof. Equipped with anti-metal layer and 3M glue for outodoor.
Cable Ties suitable for industrial use in hostile environments. Made in PA66, they are IP68 certified and can withstand up to 85°C. Universal compatibility with NFC-enabled smartphones.
NFC Buttons with embedded NFC Tag, ideal for marketing, applied to clothes and accessories.
Extremely resistant Cable Ties with embedded NFC Tag, completely waterproof, weatherproof, and suitable for industrial environments. Once closed, cable ties must be broken to be removed.
Circus Dura is a small, robust and cost-effective NFC Tag. Its reinforced structure makes it suitable in harsh environments and in wearable applications.
Round NFC Tags in ABS with a 3mm-hole. Durable and waterproof (IP66 rated), you can hang them on the wall. Universal Compatibility. Useful for industrial use.
Thanks to their thermoplastic elastomer (TPE) housing, these NFC tags resist aggressive liquids, hostile environments, seawater, temperature fluctuations, vibrations and shocks.
These Tags are great for outdoor use. they're IP68 rated (completely waterproof) and equipped with very strong 3M glue. You can choose the chip inside.
Circus Flex's flexible and robust structure allows it to be directly embedded into difficult to tag items, like playing balls, jerseys, jackets or footwear.